Scripts Category UNIX : System_administration


ScriptnameREADME
newsyslog-1.14.pl newsyslog is a highly configurable script for maintaining and archiving
sets of log files. It archives log files based on size, date or interval,
and can optionally compress log files with gzip or bzip2.
connect_times-0.01.pl  
LL_1.0.pl Prints advanced statistics on disk space usage. Useful for users/administrators not satisfied with traditional UNIX utilities such as du or ls. More info is available by executing LL.pl -h or LL.pl -m, displaying a help and a manual page respectively.
spf-milter-1.41.pl 1. INTRODUCTION
spf-milter is a Milter, which works with Sendmail 8.12 and up, and provides
an SPF-compliant extension to the SMTP communication between your MTA and
connecting clients. See http://spf.pobox.com/ for details about SPF itself.
spf-milter is written entirely in Perl, and uses the native threaded Milter
model. spf-milter is licensed under GPL.
2. PREREQUISITES
spf-milter requires:
1): Perl 5.8.x, or higher.
2): P...
zsu-1.18 zsu updates serial numbers in DNS zone files.
zsu-1.20 zsu updates serial numbers in DNS zone files.
deport-0.2.pl  
shroud-1.0 'shroud' is a script that will transform perl code into
virtually unreadable text, while retaining the full
functionality of that code. It is used to shroud the
source code of commercial perl programs. More information
is available from the POD documentation within the script
and from this URL: http://www.craic.com/resources/tech_notes/tech_note_2.html
hex-0.1 Displays a hex dump of the named file or stdin if no file is specified.
It's simple, not very clever and written in Ye olde-fashionde perle(tm). No apologies.
popdaemon004.pl This program is a full implementation of rfc 1725,
with an adjustment made to unsplit header lines so that
Netscape Communicator will not drop the connection when
it gets a message-id that is too long.
All configuration is done within the code, which means
that it is open to being tied to the database(s) of your
choice.
timeout-0.11.pl timeout executes a command and imposes an elapsed time limit. When the
time limit is reached, timeout sends a predefined signal to the target
process.
sshwatch-0.01.pl This script watches the system log file for dictionary sshd attacks and
automaticaly block the attacker ip after specified number of attempts
activitymail-1.25 This program may be used for sending email messages for CVS repository
activity. Messages can be sent for every repository change, or for every
commit. In the latter case, a list of all the files affected may be assembled
and listed or attached to the single message.
activitymail-1.26 This program may be used for sending email messages for CVS repository
activity. Messages can be sent for every repository change, or for every
commit. In the latter case, a list of all the files affected may be assembled
and listed or attached to the single message.
distinct-0.1 Prints to STDOUT a sorted list of items followed by a comma then followed
by the number of instances of that item. In fairness it is only a wrapped
implementation of a counter using a simple hash.
Take this file C<example.txt> as an example:
smp_launcher.pl A full documentation is available at http://chicken.genouest.org
ren-regexp-1.5  
mks2cvs-1.1 Converts a MKS based source repository to a CVS based respository
and converts MKS's notion of "versioning" (of each Project [.pj])
to obvious matching tags containing the same version numbers.
Contains some self-extracting helper shell-scripts.
linebreaktool-0.1.2.pl With this script you can check if a text file is of
a specific type and convert it to a different type.
Special feature is the ability of fixing files that were
broken by wrong ftp upload and download mode (ascii/bin).
Supported file types are dos, mac, unix and broken.
It also runs under DOS.
linebreaktool-0.2pre1.pl With this script you can check if a text file is of
a specific type and convert it to a different type.
Special feature is the ability of fixing files that were
broken by wrong ftp upload and download mode (ascii/bin).
Supported file types are dos, mac, unix and broken.
It also runs under DOS.
(unix2dos dos2unix fixeol newline linebreak)
DnsPixie_1.29.pl DnsPixie will update one or more designated DNS records at a number of
popular dynamic DNS services either once or periodically.
RpGet_1.04.pl Remote-printer job-retrieval program; retrieves and prints
print-data files uploaded by the RpSend.pl program.
RpSend_1.03.pl Remote-printer send program, intended to capture appsocket (port 9100)
print streams and upload them to a server from which they can subsequently
be downloaded for printing.
dnsperf-1.05.pl A simple tool for comparing the response times of designated DNS servers.
filemail_3.05.pl filemail breaks an input stream into parts, then encodes
each part and emails it to designated recipients.
nslookup-1.01.pl A perl implentation of the Linux 'nslookup' utility, suitable for use in
non-interactive mode on FreeBSD and other operating systems.
watch-1.08.pl A perl implementation of the watch command found on many Linux systems.
check_mysql.pl  
lpquota-0.3.pl  
spam.kill_uname_guessers-1.11.pl A daemon to detect spammers trying to harvest email addresses by username
guessing and temporarily DROP them with iptables firewall rules.
sudoscriptd sudoscriptd
creates a named pipe (FIFO) in a spool area, and hangs around waiting
for someone to write to it. When output is received, it is timestamped
and placed in a log file in /var/log. The size of the data received is
monitored. When the size of the log plus the size of the data exceed
2MB, the log is rotated and gzipped in a subprocess. At most 10 logs
are kept hanging around. Multiple processes can write to the fifo at
t...
sudoshell Sudo is a tool used for running programs with root privilege. Its
major benefit is the audit trail it provides, as it logs each
invocation with the command name, its arguments and the user who ran
it. Because this audit trail is lost if a user runs a shell (e.g. bash
or csh) with sudo, many sites restrict sudo to not allow such
usage. Since this can cause problems, (see L<SUDO AND SHELLS>) many
users prefer to retain the root pas...
parents  
waitcond-0.32 Test or wait for an event using boolean expressions on top of a
language of tests like grepping in ps-output and logs, pinging hosts
or waiting for events like 'not-recently-changed' or 'network
interface N is idle'.
mkpw-1.0 Produce some simple passwords, suitable for use on low-value web
sites. These passwords are not cryptographically secure, so do not
use them on high security sites (use a fips-181 password generator,
instead).
mkpw-1.1 Produce some simple passwords, suitable for use on low-value web
sites. These passwords are not cryptographically secure, so do not
use them on high security sites (use a fips-181 password generator,
instead).
install-1.31.pl A Perl replacement for install(1).
cisco_backup.pl  
multi_color_tail.pl  
sqlplus_wrapper.pl  
cxfsdump-0.4 This script is intended for dumping CXFS filesystems using a jukebox
(tape robot)
It does all the job of loading tapes with the stacker (the robotics
control program), relocating the metadataserver for the CXFS filesytems,
launching the xfsdump utility, rewinding and ejecting tape and unloading it with
the stacker again. If a xfsdump needs more than 1 tape, it is able to change
the tape and span the dump to the next tape.
The scri...
backup-reporter-1.03 This is a general script for many types of backup jobs. You can use it
to configure different types of backups, which can run together
or independently of each other. It also formats a nice report
for each backup job.
countmail-1.01 This script scans the current mail log and several recent
mail log archives, and searches for messages sent to or from
a particular address. It counts them up and mails a report
with an inbound count and an outbound count.
NAfixperms-v1.6.pl NAfixperms.pl - goes through Network Appliance snapshots, and resets
permissions on specified files within a directory
NAfixperms-v1.8.pl NAfixperms.pl - goes through Network Appliance snapshots, and resets
permissions on files within specified directories
PIXcmpcnf-v1.2.pl PIXcmpcfg - compares two config files, and reports what has been
added and removed. Originally written to be used with a Cisco PIX. Could be used with any devices two config files.
PIXcmpcnf-v1.3.pl PIXcmpcfg - compares two config files, and reports what has been
added and removed. Originally written to be used with a Cisco PIX. Could be used with any devices two config files.
testaddr-v1.36.pl testaddr.pl - searchs through aliases on a qmail server, in the same
order as the qmail services, and reports the first working alias or
delivery box.
bcrond-0.82.par This is a par <http://www.perl.com/language/ppt/src/par/index.html>
archive. You may extract it by running it through perl as
perl bcrond-0.82.par
or with unpar (at the same URI).
This archive contains a perl clone of Vixie cron, with several enhancements.
It should be cross-platform compatible, and is known to work under Windows 9x,
Linux, and SunOS/Solaris.
desift.pl desift is a data-driven, temlate-oriented text filter. It occupies a
niche somewhere between spartan shell utilities such as 'cut' and
full-featured template engines.
rsc rsc executes a (Perl!-)Script on another host. Neither this target script,
nor rsc or parts of it, nor input or output files have to be located
on the target machine.
There's no need to prepare the target system in any special way. No special
deamon has to run there, only perl 5.005 or higher with a few modules installed
and an rsh deamon are required. Additionally, this remote perl installation needs
installations of t...
rpmquery-19991213 This script can be used to query information not supplied by the rpm
tool.
alcatel_readserial-0.2 Reads data on the searial port that has been provided by an Alcatel OmniPCX
phone system. The data is then processed and re-written into a csv file
for later processing.
LatexReferenceCheck-0.2  
remote-ssh-access-1.7 This small script creates and uses shortcuts for launching SSH sessions. It's a useful tool
when you have a lot of systems to manage.
This program is meant to be executed through a symlink to a hard link. The hard link file is
called a C<parameter file>; the symlink is referred to as the C<shortcut>. If you wish,
the hard link may also serve as the shortcut, obviating the step of creating a symlink.
The C<parameter file> is cre...
ped-1.2 Ped is a sed-like filter using perl regex (when no filenames are given),
and an edit-in-place (like perl -i) that preserves soft and hard links and
offers flock support when filenames are specified.
storableedit-1.5.pl A simple command line editor for Perl Storable files. The interface is similar to a shell. It allows to easily walk through the data structure of the file and to list and change values.
eve-1.0  
psmax  
mirror-tightwad-0.2  
californicus-linux-1.0.0 californicus-linux is a tool for taking a passwd, group, and shadow file and generating a LDIF for them.
mwcDHAadd-1.0.4 mwcDHAadd - adds a DHCP LDAP entry. This is for use with the other mwcDHCP tools and ISC
DHCP LDAP patch.
mwcDHAls-1.0.4 mwcDHAls - list DHCP LDAP entries. This is for use with the other mwcDHCP tools and ISC
DHCP LDAP patch.
mwcDHArm-1.0.5 mwcDHArm - removes a DHCP LDAP entry. This is for use with the other mwcDHCP tools and ISC
DHCP LDAP patch.
mwcLDAadd-1.0.4 mwcLDA is adding DHCP users in a LDAP directory. This is for use with mwcDHCPauth.
mwcLDAls-1.0.6 mwcLDA is used for administrating DHCP users in a LDAP directory. This is for use with mwcDHCPauth.
mwcLDArm-1.0.4 mwcLDArm is used for removing DHCP users in a LDAP directory. This is for use with mwcDHCPauth.
passask-1.0.0 Takes input and does not print any thing. It then prints it out to STDOUT. example csh usage:
alias llogin setenv LDAPpassword \`./passask.pl\`
qar-bufo-1.3.1 qar-bufo generates the Qmail assign and recipients file based on unix groups.
quotadm-0.0.2e quotadm is a user quota reporting tool. It can be used to get a table of users containing their quota
usage, threshold limit, threshold usage etc. quotadm can also be used to send e-mail warning messages
to the users' whose quota has reached near or over quota threshold.
pop3dele-1.2.pl pop3dele is a simple script that connects to a POP3 server and
deletes the indicated messages, by message number. It accepts
message numbers on the command line, or through STDIN.
You have some flexibility in the message-ids that are accepted.
The keywords "all" will delete all messages on a POP3 account, but
this will only work if this is the only message ID argument provided.
Message ID numbers can be given in ranges as well, l...
pop3list-1.3.pl pop3list is part of the POP3Utils package, and is used to
programatically list the contents of a POP3 account. It
accepts a bunch of nifty input that allows you to change it's
behavior. It's really quite a cool idea, IMHO.
pop3retr-1.2.pl pop3retr is a simple script that connects to a POP3 server and
retrieves the indicated messages, by message number. It accepts
message numbers on the command line, or through STDIN.
This functions very simillarly to L<pop3dele>, so refer to that
manpage for more details.
cpiotool-0.65 backup script that uses cpio
rmtcopy-0.11 copies remote tapes using dd and ssh pipe
search-1.03 search ldap database for specified attributes.
make.pl-0.5 Make with Perl as the rule language.  Write a plain makefile in Perl syntax.  Or, write a program that among others does a few file-dependency driven things.
http://dapfy.bei.t-online.de/make.pl/
p-1.2 ps wrapper
 · sort by pid or other column
 · skip self and ps
 · grep (-v)
 · tree
 · can kill selected processes
 · loop mode (with diff)
p-1.3 ps wrapper
 · sort by pid or other column
 · skip self and ps
 · grep (-v)
 · tree
 · can kill or call command
 · loop mode (with diff)
spar-1.0 Simple Perl ARchive manager
 · much smaller than tar for small files
 · best for text files
 · helps renaming files along with contents
 · self unpacking
 · embeddable unpacker
 · Emacs mode
spar-1.1 Simple Perl ARchive manager
 · much smaller than tar for small files
 · best for text files
 · helps renaming files along with contents
 · self unpacking
 · embeddable unpacker
 · Emacs mode
dbfileutil-1-1.pl Export/Import between DB_File and SDBM_File
from Windows and Unix platforms
SDBM_Files can be ftp'ed across Unix/Windows
platforms and work without a hitch. (pag and
dir files). DB_Files can't be ftp'ed across
platform. (something to do with edian)
I like to use DB_File instead of SDBM_File
This util will export a DB_File to SDBM_Files
for you to ftp. Then you can import the
files (after ftping) by coverting to DB_File
at destina...
dbfileutil-1-2.pl Export/Import between DB_File and SDBM_File
from Windows and Unix platforms
SDBM_Files can be ftp'ed across Unix/Windows
platforms and work without a hitch. (pag and
dir files). DB_Files can't be ftp'ed across
platform. (something to do with edian)
I like to use DB_File instead of SDBM_File
This util will export a DB_File to SDBM_Files
for you to ftp. Then you can import the
files (after ftping) by coverting to DB_File
at destina...
searchengineterms-1.0.pl Given entries from your httpd access logs, this script will return a list of
search terms that users used to find your site. The script doesn't attempt to
parse the log entries at all, it just looks for something in the string that
resembles a referer URL from a search engine. Obviously, your web server must
be configured to log the referer URL in your access logs or this script wont' work.
Here are a couple examples of how you...
ibmonitor-2005.0114-1.3 ibmonitor is a command line program which will run
on a linux console or xterm (rxvt, konsole, gnome-terminal, etc)
usage: ibmonitor [--bits] [--bytes] [--max] [--avg]
[--interval n] [--data] [--colors | --nocolors]
[--dev regex] [--file proc] [--help] [--version]
The following command line options (and their explanation) are available:
--bits -> Show output values in KBits...
editLargefile-1.0.pl  
logAnalyzer-1.0.ptk The following script is designed to read the Native Logfile Format(NLF) and generate
outputs in different graphical forms. logAnalyzer-1.0.ptk written in perl/Tk can find its applications
in Analyzing huge logfiles generated by servers, building information database to sort the
internet usage depending on various requirements, gaining more control over the security of
the proxy servers by restricting users as per their requiremen...
bmonitor-2.12.pl bmonitor is a perl script to monitor LSF jobs.
Every minute the script show for each jobs useful informations:
CPU : number of processors asked par the users
MEM : memory used by the job (MB)
SWAP : swap used by the job (MB)
CPUTIM : cpu time of the job (hh:mm)
JOB : number identification of the job
USER : user login
STAT : status of the job (PEND, PSUSP, USUSP, SSUSP, RUN)
QUEUE : name of t...
bmonitor-2.21.pl bmonitor is a perl script to monitor LSF jobs.
Every minute the script show for each jobs useful informations:
CPU : number of processors asked par the users
MEM : memory used by the job (MB)
SWAP : swap used by the job (MB)
CPUTIM : cpu time of the job (hh:mm)
JOB : number identification of the job
USER : user login
STAT : status of the job (PEND, PSUSP, USUSP, SSUSP, RUN)
QUEUE : name of t...
sperl-1.00 sperl is some kind of enhanced perl that lets you work in a network
environment and run scripts and oneliners in remote machines without
the need to
ask  
crontab2english_0.71.pl Translates crontab notation into English, for sanity checking: For
example, "10 8 15 * * foo bar" into: Run: foo bar with input
"baz\x0a" At: 8:10am on the 15th of every month
lns_2.01.pl  
rediff-1.0.pl Diff format converted (unified <-> context).
This script takes context or unified diff, and produces a diff,
that would be created by C<diff> program if it would be run with command-line
options passed to this script. C<-c>, C<-u>, C<-b>, C<-w>, C<-t> options are
supported. E.g. convert to unified diff with tabs expanded:
rediff -ut <old_diff >new_diff
rediff-1.1.pl Diff format converted (unified <-> context).
This script takes context or unified diff, and produces a diff,
that would be created by C<diff> program if it would be run with command-line
options passed to this script. C<-c>, C<-u>, C<-b>, C<-w>, C<-t> options are
supported. Non-diff C<-r> option can be used to reverse the diff.
E.g. convert to unified diff with tabs expanded:
rediff -ut <old_diff >new_diff
workspace-0.40.pl  
make_rpm-2.0.pl Automatically generate an RPM software package from a list of files.
make_rpm.pl builds the RPM in a very clean and configurable fashion.
(Making RPMs "the simple way" in a one-line command.)
make_rpm.pl generates and then deletes temporary
files (and binary root directory tree) to build an RPM with.
It is designed to work cleanly and independently from pre-existing
directory trees such as /usr/src/redhat/*.
wol.pl  
netstats-0.04.pl This script displays any or all of the 'netstat' socket status counts
on Windows and Unix platforms, once, or in a continuous loop.
Connection-Tracker-0.1.pl  
Process-Detail-0.1.pl  
permafrost-20021022  
dvdsum-1.01 Creates a file containing MD5 checksums of all files in a directory
hierarchy for burning to DVD with the files for later verification.
eml-0.4.pl eml.pl wraps a user-defined command and, upon completion,
sends a email with statistics, diagnostics (return value,
kill signal, duration,...) and output and/or errors.
logrotate-1.06 Rotate log files and optionally send a signal (default is HUP) to the
specified process ID, then optionally compress the newly rotated log
file(s). As many different log files may be specified on the command line
as desired.
Command line options:
fbsdbuild-0.0.0.pl fbsdbuild - A tool for building FreeBSD from source.
dircmp-1.1 Help CVS users manage branches.
Report the source code files that are different in two directories.
Report the files existing in dir1 but missing from dir2.

Kurt Starsinic
Last modified: Wed Feb 21 06:46:27 2024